|
AUTOMATICA , the International Trade Fair for Automation and Mechatronics
Stemmer Imaging group, one of our distributors, presented in its booth a
demo of AQSENSE Match 3D tool. This demo shows how quality control
can be applied on the production line.
Using laser triangulation technology and a conveyor belt, some objectes were scanned obtaining their 3D representation.
These 3D surfaces were aligned and compared with a preloaded reference model. The disparity map shows the discrepancy of the scanned parts with respects to the reference model.
|
|
|
AQSENSE introduces its 3D Vision
Tool kit.Presence in Vision 2008
AQSENSE is launching SAL3D, The 3D
Shape Analysis Library, its C++ software development library for 3D
machine vision industrial applications, with special focus on 100%
parts inspection at production line speed.
AQSENSE's products, including Common
Vision Blox compatible versions, present at Vision 2008, at Stemmer’s
booth, Hall 4 C 51. Application demo with Automation Technology 3D
cameras.
An application demo, by ACT Smartware,
based on 3D Photon Focus cameras and AQSENSE ‘s SAL3D tools , at
Photon Focus Hall 4 Booth C 71.
|
|
|
Imaging and Machine Vision europe announces the AQSENSE toolkit.
"Aqsense has launched its C++ software development suite for 3D machine
vision industrial applications. Focusing on the processing and analysis
of organised 3D point cloud data, it's structured as a set of tools
that can be connected to a common core.
The currently available tools include: the Peak Detector tool, a
highly accurate laser stripe detector; the Metric Calibration tool
providing true XYZ coordinates to be accurately extracted from laser
triangulation range maps; the Merger Tool, focused on occlusion or
shadow minimisation; and the Match3D tool, a highly sophisticated tool
allowing 100 per cent part inspection using best-fit alignment and
comparison for 1 million point surfaces.
Features include
easy-to-use C++ components suitable for most C++ compilers, hardware
acquisition independence, and open architecture for easy extension by
custom and third party components, among others. Common Vision Blox
versions are available, as is extensive on-line documentation."
|
|
|
 The European Machine Vision Association (EMVA ) presents in its July 2008 newsletter the 3D camera of Photonfocus. The article describes the advantages of combining the LinLog technology of Photonfocus with the new laser detector algorithm of AQSENSE.
Newsletter of July 2008
This camera is also presented in the Inspect journal.
|
|
|
AQSENSE peak detector and 3D matching technology referenced in Inspect
December 2007/January 2008 Issue.
[3D-Software zur Qualitäts- und Performancesteigerung]
|
|
|
|
<< Start < Prev 1 2 3 Next > End >>
|
| Results 19 - 27 of 27 |
